NOTICE:

Information provided in these message boards is not necessarily the opinion of Sprung Services, Inc.  These discussion boards are provided as a free service to the boiler operations community to promote the free exchange of ideas and to provide assistance from one boiler operator to another as they see fit. 

Sprung Services accepts no responsibility nor guarantees the accuracy of any posts in these message boards.

NOTICE:

Information provided in these message boards is not necessarily the opinion of Sprung Services, Inc.  These discussion boards are provided as a free service to the boiler operations community to promote the free exchange of ideas and to provide assistance from one boiler operator to another as they see fit. 

Sprung Services accepts no responsibility nor guarantees the accuracy of any posts in these message boards.
RE: Thermostat by Reed
Oops, Bob had that one I guess. Both of our answers are correct. I just went over the river and th...
RE: Thermostat by Reed
Imagine you have a house that heats up faster in a room other than the one the thermostat is in....
RE: Thermostat by RBob
Hi Daniel: Increasing the setting will cause the cycle time of the boiler/furnace to increase--or...
RE: Class participation exercise by Reed
I'll talk to him about it.  We haven't made improvements to the class for a while, but we are u...
Class participation exercise by mikeg5675
Good Morning Reed, I just wanted to let you know Dirk had a great class participation exercise in w...
Thermostat by Daniel
What does longer on the anticipator setting on a mercury switch thermostat mean? Dan
RE: Cool Picture! by Daniel
Very cool photo. Dan
RE: Hot Water Boilers by Waterdoctor
Both Sodium Molybdate and Sodium Nitrite and components that lay down a protective layer on clean me...
RE: Hot Water Boilers by Reed
Type-o: "molybdate" Andy, Would you mind providing a basic description of what nitrites do and...
RE: Hot Water Boilers by Waterdoctor
There are chemical treatments specifically for hot-water boilers. They typically utilize Moybdate or...
Sprung Services Public Forums
Forums > Boiler Discussions - All Locations/Regions > Water Treatment
Subject: It Couldn't Be Any Easier!
Prev Next
You are not authorized to post a reply.

Author Messages
harrysetUser is Offline
Novice Member
Novice Member
Posts:17
01/25/2012 3:02 PM  

Thanks for all of the help.  Today all of my readings were within specs.  I'll probably chase them around, just a little bit, for a while.  At least until I get a full handle on MUF and possible condensate return questions.

 

Dealing with sulfite only sure beats treating with three seperate chemicals. 

You are not authorized to post a reply.
Forums > Boiler Discussions - All Locations/Regions > Water Treatment > It Couldn't Be Any Easier!


ActiveForums 3.7

You must be registered and logged in to post a question or reply to a question.  Registration is FREE!  There are more message boards at: SprungTraining.com.

You must be registered and logged in to post a question or reply to a question.  Registration is FREE!  There are more message boards at: SprungTraining.com.