NOTICE:

Information provided in these message boards is not necessarily the opinion of Sprung Services, Inc.  These discussion boards are provided as a free service to the boiler operations community to promote the free exchange of ideas and to provide assistance from one boiler operator to another as they see fit. 

Sprung Services accepts no responsibility nor guarantees the accuracy of any posts in these message boards.

NOTICE:

Information provided in these message boards is not necessarily the opinion of Sprung Services, Inc.  These discussion boards are provided as a free service to the boiler operations community to promote the free exchange of ideas and to provide assistance from one boiler operator to another as they see fit. 

Sprung Services accepts no responsibility nor guarantees the accuracy of any posts in these message boards.
Butterfly valves by Mike Miller
Why are we using butterfly valves to balance water flow instead of a ball valve?
Steam drum question by Daniel
Is there a difference between seperators or dryers (steam scrubbers) in a steam drum, or&#...
RE: Prepackaged boilers by Reed
Most of the boilers we talk about in class are large enough to fall into the category Bob is talking...
RE: Prepackaged boilers by RBob
Hi Mike: I believe that most package boilers are built to spec--People may think that because ...
Prepackaged boilers by mikeg5675
Hi Reed, I am currntly in the STS-1 class. I have a question concerning pre packaged boilers. When ...
RE: Sprung Training Systems by Reed
Matt, Which note from last week? Things get to be a blur after a while. You can certainly post ...
RE: Sprung Training Systems by Matt Warren
Reed, Just read your note from last week, I will post those questions on the SprungTraining.com,...
RE: Sprung Training Systems by Matt Warren
Thanks Bob Matt
RE: Sprung Training Systems by Matt Warren
Question 1. concerning water tube boilers. I now know that the flow from the steam drum goes to the...
RE: steam temp by Dcedergren
 There are thousands of boilers in commerical use ranging from 30 psig up to 1200 psig, from sa...
Sprung Services Public Forums
Forums > Terms and Conditions > Disclaimers and Rules
Subject: Rules
Prev Next
You are not authorized to post a reply.

Author Messages
ReedUser is Offline
Veteran Member
Veteran Member
Posts:452
11/07/2007 7:24 PM  

There are a number of rules everyone must abide by when posting on these message boards.  Some of these rules are:

  • Nobody can be abusive to others
  • No offensive posts
  • No intentionally dishonest posts
  • No insults of any kind
  • No defamation of others on the message boards (such as calling another member a liar)
  • No racism or sexism
  • No flaming

These message boards are not to be used for discussing paychecks, invoices or other company business. 

These message boards are offered as a public service.  Please keep this in mind as you post.

Most message boards have a very long list of rules and the moderators tend to be pretty power mad.  We don't want these boards to be that way.  That being said, we may add more rules in the future if there are posts that make other members uncomfortable, regardless of who the member might be.

Reed Sprung
Reed Sprung
Sprung Services, Inc.
You are not authorized to post a reply.
Forums > Terms and Conditions > Disclaimers and Rules > Rules


ActiveForums 3.7

You must be registered and logged in to post a question or reply to a question.  Registration is FREE!  There are more message boards at: SprungTraining.com.

You must be registered and logged in to post a question or reply to a question.  Registration is FREE!  There are more message boards at: SprungTraining.com.